Actichem Instabuff Super Water Based 5L

Actichem Instabuff Super Water Based 5L Floor Burnishing Solution

Actichem Instabuff Super [Water Based] – 5Lt is a professional spray buff and burnishing liquid formulated to rejuvenate worn floor finishes quickly and efficiently. Designed for high speed and ultra high speed burnishers, this advanced water based blend improves gloss levels, smooths surface scuffing and increases slip resistance when used correctly.

It is particularly suited for vinyl, sealed timber, terrazzo and other resilient floor surfaces commonly found in Australian commercial and industrial premises. The low residue formulation helps prevent build-up, keeping maintenance cycles simple and cost effective.

Instabuff Super supports a consistent maintenance program by reducing the need for frequent stripping and recoating. It enhances the appearance of floors in high traffic environments while helping maintain a professional finish.

---

Key Features

• Water based spray buff and burnishing solution

• Restores gloss and clarity to floor finishes

• Reduces visible scuff marks and light scratches

• Compatible with high speed and ultra high speed floor polishers

• Low residue formulation

• Supports extended floor finish life

• Suitable for commercial and industrial use across Australia

---

Uses

• Routine spray buffing maintenance

• High speed burnishing programs

• Gloss enhancement on vinyl and sealed floors

• Maintenance of polished commercial floor finishes

---

Technical Data

• Appearance: Clear liquid

• Base: Water based formulation

• Application: Spray buff or burnish method

• Coverage: Varies based on floor condition and dilution method

• Compatibility: Suitable for most resilient floor finishes

• Pack Size: 5 Litres

• Made for professional commercial use

---

Safety Precautions Recommended

• Wear protective gloves and safety eyewear during handling.

• Ensure adequate ventilation when applying in enclosed spaces.

• Avoid direct contact with skin and eyes.

• Do not mix with incompatible chemicals.

• Refer to the Safety Data Sheet (SDS) before use.

• Keep out of reach of children.

---

Proper Storage Guidelines

• Store in original sealed container.

• Keep in a cool, dry area away from direct sunlight.

• Avoid extreme heat or freezing conditions.

• Ensure lid is tightly secured after use to prevent contamination.

---

Water Hardness Suitability

Actichem Instabuff Super performs effectively in soft to moderately hard water conditions commonly found across Australian metropolitan and regional areas.

• Soft to moderate hardness: Optimal performance and gloss development.

• High mineral content water: Use filtered or softened water if dilution is required to maintain maximum shine and reduce streaking risk.

For areas with very hard water, pre-cleaning the surface with a neutral cleaner is recommended to minimise mineral interaction.

---

Storage, Maintenance & Operational Guidelines

Storage:
Maintain product in controlled temperature storage between 5°C and 30°C. Rotate stock using first in, first out practice.

Maintenance:
Regularly clean burnishing pads and check machine RPM compatibility to ensure consistent gloss results.

Operational:
Apply fine mist spray directly in front of the burnisher. Avoid over-application. Use clean pads to prevent surface swirl marks.