Actichem Spotting Kit Professional

Actichem Spotting Kit Professional Stain Removal Kit Australia | Ultimate Solution

The Actichem Spotting Kit – ea is a complete stain management solution developed for professional carpet cleaners, commercial cleaners and facility maintenance teams across Australia. It is designed to address a wide range of carpet and upholstery stains commonly found in offices, hospitality venues, aged care facilities, schools and residential properties.

This kit typically includes selected spotters formulated to treat specific stain categories such as protein-based stains, tannin stains, oil and grease contamination, dye transfer and general soiling. Each product works in a targeted way, reducing the risk of fibre damage while delivering controlled stain breakdown.

It is particularly suited for:

• Commercial carpet maintenance

• Hospitality and accommodation cleaning

• Emergency spill response

• Vehicle interior detailing

• Routine maintenance of high-traffic areas

The kit supports technicians by eliminating guesswork. Instead of using a single general cleaner, operators can select the appropriate spotter based on stain type, fibre and severity.

---

Key Features

• Professional grade stain removal system

• Targeted spotters for specific stain types

• Suitable for carpets and upholstery

• Compact kit for mobile technicians

• Compatible with most synthetic carpet fibres

• Designed for Australian commercial cleaning standards

• Reduces risk of over-wetting and fibre damage

• Ideal for maintenance and restoration use

---

Uses

• Removing coffee, tea and wine stains from carpet

• Treating food and beverage spills in hospitality venues

• Removing grease and oil contamination

• Spot cleaning high-traffic commercial areas

• Upholstery stain correction

• Pre-treatment before hot water extraction

---

Technical Information

• Application Method: Trigger spray or controlled application depending on included spotters

• Surface Compatibility: Most synthetic carpet fibres including nylon and polypropylene

• pH Range: Varies depending on individual spotter within kit

• Residue Profile: Low residue when used as directed

• Foaming: Controlled foaming formulations

• Dilution: Some products ready-to-use, others may require dilution as per label

• Packaging: Supplied as a complete kit (ea)

Always perform a pre-test in an inconspicuous area before full application.

---

Safety Precautions

• Always read Safety Data Sheets (SDS) before use

• Wear protective gloves and safety eyewear during application

• Ensure adequate ventilation in enclosed areas

• Avoid mixing different spotters unless manufacturer instructions allow

• Keep away from children and food preparation areas

• Do not allow product to dry on sensitive fibres without rinsing or blotting

---

Storage Guidelines

• Store in original containers with labels intact

• Keep in a cool, dry and well-ventilated area

• Avoid direct sunlight and high heat

• Ensure lids are tightly secured to prevent evaporation

• Do not store near oxidising agents or incompatible chemicals

• Rotate stock following FIFO principles

---

Water Hardness Suitability

The Actichem Spotting Kit performs effectively in most Australian municipal water conditions.

• Soft to Moderate Hard Water: Optimal performance with minimal adjustment

• Hard Water Areas: Performance remains stable, but dilution accuracy is important

• For extremely hard water regions, using filtered or softened water can improve consistency, particularly when dilution is required

Most spotters in the kit are formulated to remain stable under typical Australian water hardness levels.

---

Maintenance & Operational Guidelines

• Identify stain type before selecting spotter

• Blot, do not rub, to prevent fibre distortion

• Apply minimal product to control moisture levels

• Rinse or neutralise where required

• Allow adequate drying time

• Maintain accurate documentation in commercial facilities