AGAR SD 37 5L Professional

 AGAR SD 37 5L Professional – Powerful Commercial Floor Sealer Australia

AGAR SD-37 – 5L is a heavy-duty floor sealer developed for use as a base coat in commercial strip and recoat systems. It prepares porous or worn vinyl and linoleum floors for polish application by sealing the surface and promoting stronger bonding of subsequent finish layers.

In Australian retail centres, schools, healthcare facilities and office buildings, proper sealing is critical to achieving long-lasting results. SD-37 helps create a uniform base that reduces polish absorption into porous substrates, resulting in improved gloss retention and increased resistance to scuffing and wear.

When integrated into a structured floor maintenance program, AGAR SD-37 enhances overall system performance and supports extended maintenance cycles.

---

Recommended Uses

• Base coat before applying floor polish

• Vinyl and linoleum flooring

• Porous or worn hard floors

• Retail centres and shopping complexes

• Schools and universities

• Commercial office buildings

• Healthcare non-clinical facilities

---

Key Features

• Professional commercial floor sealer

• Improves adhesion of floor polish systems

• Reduces polish absorption on porous surfaces

• Enhances overall finish durability

• Suitable for high-traffic environments

• Designed for Australian commercial cleaning standards

---

Technical Data (Typical Properties)

---

Safety Precautions Recommended

• Review the Safety Data Sheet before use.

• Wear protective gloves during handling and application.

• Avoid contact with eyes and prolonged skin exposure.

• Ensure adequate ventilation during application.

• Do not mix with incompatible chemicals.

• Keep out of reach of children.

---

Proper Storage Guidelines

• Store in original container with lid tightly secured.

• Keep in a cool, dry and well-ventilated area.

• Protect from freezing temperatures.

• Avoid exposure to excessive heat and direct sunlight.

• Store away from food preparation areas.

---

Suitable Water Hardness Levels

AGAR SD-37 is generally applied as supplied. If dilution is required, standard Australian municipal water, including soft to moderately hard water, is suitable. In areas with very high mineral content, filtered water may assist in maintaining consistent application quality.

---

Storage, Maintenance & Operational Guidelines

• Ensure floors are completely stripped and neutralised before application.

• Apply thin, even coats using clean application equipment.

• Allow full drying before applying floor polish.

• Avoid over-application to prevent build-up.

• Follow with compatible AGAR polish systems such as Vantage, Sympol or Autobrite.