Powerful Comac C130 Ride On Scrubber | Industrial Floor Cleaning Australia

The Comac C130 ride-on floor scrubber series is engineered for demanding Australian work environments where durability, safety and productivity matter every day. Both variants come equipped with a high-performance cylindrical brush system and four nylon brushes, ensuring effective cleaning on concrete, epoxy, tiles and textured surfaces. Operators can work comfortably thanks to a well-balanced chassis, responsive controls and an ergonomic driving position that reduces fatigue during long shifts.

The Bi-Fuel model supports extended operating hours, making it suitable for facilities that need long runtimes without constant battery charging. The C130BS model offers a full battery-powered solution with consistent energy delivery for indoor applications.

These scrubbers suit large-scale cleaning where fast coverage, strong debris pick-up and reliable maintenance are essential. A built-in safety belt and stable wheelbase add an extra level of operator protection, while the cylindrical brush deck excels at removing built-up dirt in fewer passes.

Key Features

• Cylindrical brush deck with four nylon brushes for deep cleaning

• Large cleaning path designed for wide-area industrial use

• Strong solution delivery and controlled water usage

• High-capacity recovery tank for longer working intervals

• Ergonomic operator seat with safety belt

• Intuitive controls suitable for new and experienced operators

• Stable ride-on chassis for indoor and outdoor hard floors

• Heavy-duty construction suited to Australian industrial conditions

• Easy-access service points for quick maintenance

• Suitable for warehouses, factories, car parks and distribution hubs

Technical Data

Comparison Table Between Variants

Recommended Safety Precautions

• Always wear a high-visibility vest, gloves and hearing protection in large sites.

• Use the safety belt during all operations.

• Operate at safe speeds, especially in narrow aisles or high-traffic areas.

• Keep hands and clothing clear of the brush deck during operation or maintenance.

• Disconnect the power source before servicing or brush changes.

• Ensure floors are free of loose debris before starting to prevent brush damage.

Storage Guidelines

• Park the scrubber indoors in a clean, dry and well-ventilated area.

• For battery units, charge the batteries after each use and avoid deep discharging.

• Keep the solution and recovery tanks empty to prevent odours and scale.

• Store with the squeegee raised to avoid pressure marks.

• Avoid storing in extreme heat or direct sunlight to protect seals and electronics.

Maintenance Guidelines

• Rinse solution and recovery tanks daily to prevent chemical build-up.

• Check brushes and replace when worn for consistent cleaning results.

• Inspect the squeegee weekly for cuts or hardening.

• Lubricate moving parts as recommended in the service schedule.

• Confirm tyre pressure and wheel condition regularly.

• For Bi-Fuel units, ensure engine servicing is done at the required intervals.

Operational Guidelines

• Conduct a pre-use inspection including battery level, fuel level (Bi-Fuel), squeegee condition and brush alignment.

• Set the correct water flow based on the floor type.

• Start cleaning from the far end of the area and work in straight, overlapping passes.

• Empty recovery tanks before they fill completely to maintain suction efficiency.

• Clean the machine after each shift for best long-term reliability.

Water Hardness Recommendations

• Moderate to soft water is ideal to reduce scale in tanks, lines and valves.

• If operating in hard-water regions, use a descaling additive or run periodic descaling cycles.

• Avoid extremely hard water without treatment as mineral deposits can damage internal components over time.